Omega ILD44-UTP User Manual download pdf (Page 8)

1.3 Before You Begin

Inspecting Your Shipment:

Remove the packing slip and verify that you have received everything

listed. Inspect the container and equipment for signs of damage as soon

as you receive the shipment. Note any evidence of rough handling in

transit. Immediately report any damage to the shipping agent. The carrier

will not honor damage claims unless all shipping material is saved for

inspection. After examining and removing the contents, save the packing

material and carton in the event reshipment is necessary.

Customer Service:

If you need assistance, please call the nearest Customer Service

Department, listed in this manual.

Manuals, Software:

The latest Operation and Communication Manual as well as free

configuration software and ActiveX controls are available from

the

website listed in this manual or on the CD-ROM enclosed with your

shipment

For first-time users: Refer to the QuickStart Manual for basic operation

and set-up instructions.

If you have the Serial Communications/Ethernet Option you can easily

configure the controller on your computer or on-line.

To Disable Outputs:

Standby Mode is useful during setup of the instrument or when

maintenance of the system is necessary. When the instrument is in

standby, it remains in the ready condition but all outputs are disabled.

This allows the system to remain powered and ready to go.

When the instrument is in "RUN" Mode, push d twice to disable all

outputs and alarms. It is now in "STANDBY" Mode. Push d once more

to resume "RUN" Mode.

PUSH d TWICE to disable the system during an EMERGENCY.

To Reset the Meter:

When the controller is in the "MENU" Mode, push c once to direct

controller one step backward of the top menu item.

Push c twice to reset controller, prior to resuming "Run" Mode except

after "Alarms", that will go to the "Run" Mode without resetting the

controller.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 70 71

No comments

Omega ILD44-UTP User Manual Page 8