Omega 8003 User Manual download pdf (Page 4)

ASSEMBLY INSTRUCTIONS

For Juicing

STEP 1 Place the auger into the drum. Insert the juicing screen into the drum

with the protruding tab at the bottom. Place the drum cap onto the drum end

and turn it counterclockwise until it is firmly in place.

STEP 2 Connect assembled drum set with main body by inserting the visible

part of the metal shaft into the hex area on the main body. Secure by turning

the locking clip clockwise. Place the hopper onto the drum.

STEP 3 Place juice bowl and waste bowl under drum set. Plug power cord

into wall outlet. Press the power switch down on the ON side of the switch.

For All Non-Juicing Functions

STEP 1 Place the auger into the drum. Insert the blank into the drum with

the protruding tab at the bottom. Insert the appropriate nozzle into the inside

of the Drum Cap. Place the drum cap onto the drum end and turn it

counterclockwise until it is firmly in place.

STEP 2 Connect assembled drum set with main body by inserting the

visible part of the metal shaft into the hex area on the main body. Secure

by turning the locking clip clockwise. Place the hopper onto the drum.

STEP 3 Place the two bowls under the drum set. Plug the power cord into

wall outlet. Press the power switch down on the ON side of the switch.

Congratulations!

You are ready to use your Omega 8003/8005 Nutrition Center.

All items will be placed down the feed chute. Use the plunger to press

the items into the chute. Leave the machine running while you process

the items. When juicing, the juice will exit the bottom of the drum

and the pulp will exit out the end of the drum cap. For all other

functions, everything will exit through the end of the drum cap.

STEP 4 DO NOT place any metal objects into the hopper. If drum set

is clogged or the machine stops operating, press the reverse button 2 to

3 times and press the ON button again to resume normal operation.

STEP 5 Switch the juicer OFF before changing or touching any moving

parts. Remove the drum set from the main body by turning the locking

clip counterclockwise. Pull the auger forward to disassemble it from the

drum set. After each juicing session, wash all parts in warm soapy water.

All of the removable parts are dishwasher safe. Do NOT place the motor

housing into the dishwasher.

Do NOT run juicer more than 30 minutes continuously at any one time.

Choosing the Correct Cones

Juicing Screen This is the cone with the stainless steel mesh. It is used

for all juicing functions and only juicing functions.

Blank Cone This is the cone constructed of solid polycarbonate with a

stainless steel rim on the inside. It is used for all functions except juicing.

All six nozzles may be used with the blank cone.

Choosing the Correct Nozzles

Oval Nozzle

• Mincing and chopping vegetables

• Making nut butters

• Homogenizing frozen fruit, milk or yogurt

• Extruding breadsticks

Round Nozzle

• Mincing and chopping vegetables

• Making nut butters

• Homogenizing frozen fruit, milk or yogurt

• Extruding breadsticks

Four Remaining Nozzles

• Extrusion of various sized pastas.

Sieve

The included sieve, which fits on both of the bowls, should only be needed

after processing items that seem to have too much pulp in the juice or foam

on the top of the juice. It is best to use the sieve at the end of the juicing

process by pouring all of the prepared juice through the sieve.

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Omega 8003 User Manual Page 4

Comments to this Manuals

Related products and manuals for Juice makers Omega 8003