Omega WMS-16 User Manual download pdf (Page 14)

to always have DCD on. The modem is then plugged into a

telephone line and it is ready to be called from a remote

location.

In order to call the WMS-16 from a remote computer the

computer needs to have a communications program such as

HyperTerminal or Procom. The communications parameters

for the communications program are ASI, 9600, 8-N-1.

When the computer calls the WMS-16, the WMS-16’s modem

will go off-hook and the WMS-16, will begin transmitting to

the remote computer. All of the WMS-16’s functions are

available from the remote computer. This includes observing

real time data, looking at the hourly or daily logs, down

loading data, and changing setup parameters such as logging

period.

APPENDIX 1 WMS-16

The WMS-16 is configured at the factory for the sensors it is shipped with. The following

information is provided to aide the user to make changes in the as delivered setup.

Instructions for setting up the WMS-16 with the following sensors.

Wind Speed and Direction

Connect the wind sensor=s signal cable to the terminal strip on the back of the control module. This sensor has

a four conductor shielded cable. The RED wire is connected to the +5 REF terminal; The BLACK wire is

connected to a GROUND terminal; the GREEN wire (wind direction signal) is connected to the A7 terminal

and the WHITE wire (wind speed signal) is connected to the P1 terminal. The WMS-16 is now ready for wind

speed and wind direction initializing.

INITIALIZATION OF WIND SPEED AND DIRECTION SENSORS

Press EXC to get the MAIN MENU.

From the MAIN MENU press number 1. STATION SET UP.

From the Station Set Up menu press number 6. ADD OR REMOVE SENSORS. Then press Y, then ENTER.

From the Sensor Types Menu select 2. WIND SPEED.

From the Wind Speed Sensors Menu select 1. (WS-01/02). Then press ENTER.

From the Sensor Input Channel select number 1, P1 (Pulse Counter). Then press ENTER.

The Sensor configuration screen is displayed and it will show:

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

No comments

Omega WMS-16 User Manual Page 14